Flatmate

Draw it flat,see it rise.

Flatmate is a free home planner for everything from tiny houses to family flats. You draw a simple plan in 2.5D and it builds the 3D for you. No 3D modelling: draw it flat, mate!

See five houses it builtWatch the tour · 0:53

A small timber house in a garden, its right half drawn as a blueprint with its dimensions, 6.60 by 3.50 metres and 3.40 metres high
Flatmate with the 20 ft studio open: its plan above, the same house in 3D on its trailer below, the furniture palette on the left and the roof and wall settings on the right

Day and night in one room

The walls stay put; only the furniture moves. At night the Murphy bed comes down and the table folds away.

The 20 ft studio's plan by day: the sofa and the table out, the Murphy bed closed
6.10 × 2.55 m
outside, a road-legal width
13.63 m²
clear floor area
5.3 → 4.7 m²
free floor, day to night

First, the walls.

Draw them on the plan with their real thickness; they join at the corners. Type a length as you go.

The 20 ft studio's walls on the plan The same walls in 3D

Every piece is a shape and a height

That is 2.5D. You draw a piece's shape on the plan, type its height in the panel, and Flatmate builds the 3D. Here, the wall unit over the sofa in the Notched cottage.

The Notched cottage's living corner on the plan, the wall unit selected on the wall behind the sofa
On the plan, its shape: 0.60 × 0.25 m against the wall.
The wall unit's panel: 0.60 by 0.25 m, 0.40 m high, elevation 1.80 m being typed, top at 2.20 m, 0.31 m under the ceiling
In the panel, its height: 1.80 m off the floor.
The same corner in 3D, roof off: the wall unit, highlighted, hangs high on the wall over the sofa, by the wood stove's flue
In 3D, both: it hangs high on the wall over the sofa.

Claude can draw with you

An MCP server gives Claude the same tools and the same rules as you: every edit it makes is checked like yours. It built four of the houses on this page.

Draw a 20 ft tiny house on wheels with a sleeping loft over the bathroom. add_walls · set_ceiling · add_deck 2 rooms · 13.63 m² · loft at +2.15 Make a Night layout with the Murphy bed down. copy_state · set_configuration Night · free floor 4.7 m²

Start from the plan you have

Drop a scan, a screenshot or an estate agent's plan under the drawing. One printed dimension sets its scale; then trace over it, or ask Claude to. Claude traced this flat from the picture alone, in 26 edits.

Watch Claude trace it · 0:23
A plan picture of a one-bedroom flat: living room with kitchen, bedroom, bath and hall, 8.00 by 5.60 m

What it does

  1. Lofts, stairs and roofs

    A desk fits under a loft bed; a bed that would hit the ceiling is refused.

    The Tokyo loft in 3D: the bedroom on its loft over the bath and closet, the winder stair up to it
  2. Finishes inside and out

    Paint, boards, brick and tiles on walls, floors and the roof.

    The Notched cottage's wall from outside, in wood board and batten, and from inside, where the shower room is tiled and the hall painted
  3. Tiny houses on wheels

    Trailer, axles, wheel wells and door steps, at a road-legal 2.55 m wide.

    The 20 ft studio in 3D on its trailer: the tongue box at the front and the steps at the door
  4. Print it to scale

    PDF sheets with plans, sections and a title block. PNG and SVG too.

    Section A–A through the Tokyo loft on its PDF sheet

And the rest of the list

Drawing

  • Walls with real thickness
  • Metres, or feet and inches
  • Room areas and free floor
  • Named areas in a room
  • Columns and beams
  • Trace over a plan picture

Furnishing

  • Beds, sofas, tables, kitchens, bathrooms, storage, stoves
  • Warnings when a wardrobe or door is blocked
  • Day and Night layouts
  • Floors in planks, tiles or colour

Heights

  • Lofts and platforms
  • Half walls and floor openings
  • Stairs, ladders and storage steps
  • Flat, shed and gable roofs
  • Guards and handrails

Seeing and sharing

  • A 3D view of everything
  • Section cuts
  • PDF to scale, PNG and SVG
  • Editing together, live
  • Claude as a collaborator

Five houses to open

Four were built by Claude, edit by edit, in 63 to 100 edits; My Home was drawn by hand. Open one for its plan, its 3D and its finishes.

Start flat.End in 3D.

Free and open source. It runs in your browser, on your own machine.

Get it on GitHub
The Notched cottage in 3D, built from its plan